Homepage | Set Home | Add to Favorites
Member

Xuchang Kaijie Abrasive Co., Ltd


Products
  • No Category
Search
 

Friends links

Mini Fast Cutting Disc
Click image to view full size image
Product: Views:497Mini Fast Cutting Disc 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2019-07-29 12:31
  Inquiry
Details

Abrasive: Aluminum oxide A Manufactured without addition of ferrous, chlorinated or sulphurous fillers. -Medium-hard, multipurpose tool of hardness P with high cutting performance and long tool life for reduced heat build-up during cutting.


Choose the wheel according to your practical application.

For multipurpose cutting work. Specially designed for hard-to-reach places.
For use on electric and air-powered straight grinders of all output categories. Can be used with mounted arbor on straight grinders.

Available in a range of sizes from 50mm to 75mm.


Frequently asked questions and solution for cutting wheel:

Possible Causes

Solution

The cutting wheel consumption fast

The hardness level of wheel is low

Select and adopt the models with high hardness level

The grinding pressure is too huge

Decrease the grinding pressure

The inner bores of cutting disc craze

The cutting disc gets stuck in the work piece

Move forward and backward evenly, and exert pressure along the diametrical direction

The cutting disc is used to grinding

Use the grinding disc in grinding process

The pressure of side direction is too huge

Avoid the flange plate with the same diameter in inner side and outside

The diameter of inner side and outside is inconsistent

Apply the flange plate with the same diameter in inner side and outside

The edge crazes while the abrasion wheel is cutting

The diameter of the flange plate is too small

Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel

The loading pressure of the flange is so huge that the flange edge of abrasion wheel of deforms

Adjust the pressure of the flange and abrasion wheel to reasonable level

It is used with improper force while cutting

Decrease the load while cutting and reduce the pressure in side direction

The diameter of the flange plate is too small

Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel

The fracture of work pieces is burnt severely

The hardness level of abrasion wheel is over high

Adopt the abrasion wheel of low hardness level and high efficiency

The work rate of the equipment is low

Replace it with high work rate

The belt of the cutting machine is loose

Adjust the tightness of the belt

The hardness level of abrasion wheel is over high

Adopt the abrasion wheel of low hardness level and high efficiency


http://www.kaijie-abrasive.com/

Inquiry